Jack White’s Third Man & Black Mountain Drop Roto Trem Pedal
Jack White's Third Man Hardware and Black Mountain Pedals drop the Roto Trem—a square-wave chop tremolo with foot-controlled speed wheel in limited yellow

Jack White’s Third Man Hardware and Black Mountain Pedals have reunited to launch the Roto Trem, a square-wave chop tremolo built into Black Mountain’s signature foot-controlled roller-wheel chassis. Available now exclusively via the Third Man Hardware Reverb Shop, the long-awaited collaboration arrives in two distinct finishes: a strictly one-time Limited-Edition Reverb Exclusive Yellow and a Standard Black colorway.
Following the success of their earlier wheel-controlled delay collaboration, the Roto-Echo, White and Black Mountain spent years refining the Roto Trem—a pedal keen-eyed fans previously spotted hidden in plain sight on White’s own live pedalboard. Designed to bring tactile, real-time foot control to rhythmic modulation, the unit lets guitarists manipulate tremolo speed mid-riff without bending down to twist a knob.
A Hard-Chopping Square-Wave Tremolo Built for Real-Time Control
Unlike smooth, vintage-style sine or triangle amplifier tremolos, the Roto Trem is a pure square-wave chop tremolo engineered to slice your guitar signal cleanly on and off in a hard, percussive rhythmic pattern. Sweeping the oversized top-mounted Speed Wheel shifts the modulation rate from a slow, deliberate pulse of roughly 1 second per cycle (at 0) to a blistering, machine-gun stutter of approximately 60 milliseconds per cycle (at 10).
To keep players locked into the groove on dark stages, dual front-panel LEDs flash continuously in direct sync with the active tremolo rate. Meanwhile, a Momentary Footswitch expands the pedal's expressive capabilities beyond standard on/off operation, enabling instant rhythmic fills or sudden dry-signal dropouts on the fly.

Full Controls and Features
- Speed Wheel: Controls the square-wave tremolo rate from a slow chop at
0to a rapid-fire pulse at10, built to be rolled smoothly or kicked abruptly with your foot while playing. - Effect On/Off Footswitch: Standard latching footswitch that engages or bypasses the tremolo circuit.
- Momentary Footswitch: Temporarily reverses the pedal's current bypass state only while held down, returning to the previous state the moment you lift your foot.
- Output Trimmer: A discreet side-mounted volume trimmer that lets you dial in exact unity gain against your bypassed signal or add a slight output lift so heavy chopping never feels like a volume drop.
- Dual Front-Panel LEDs: Two high-visibility indicators that pulse in real time with the speed wheel's chop rate.
- Power Requirements: Runs on a standard 9V DC, 0.1A (100mA) or higher, center-negative power supply with a 2.1 mm barrel connector.
How to Set Up and Operate the Roto Trem
- Connect Your Signal Chain: Plug your instrument into the input jack and route the output to your amplifier or the next pedal in your chain.
- Apply Power: Connect a standard 9V DC center-negative power adapter.
- Set Your Chop Speed: Roll the Speed Wheel between
0and10to dial in your baseline rhythmic pulse. - Engage or Bypass: Press the Effect On/Off footswitch to turn the square-wave tremolo on or off.
- Trigger Stutters and Dropouts: When the pedal is bypassed, press and hold the Momentary Footswitch for temporary chop bursts and stutter-style effects; when the effect is already engaged, press and hold it to momentarily cut the chop for sudden dry passages.
- Balance Your Output: Adjust the side-mounted Output Trimmer to match your clean bypass volume or push your amp with a subtle level boost.

Reverb Video Demo Puts the Roto Trem Through an 880-Watt Amp
To coincide with the release, Reverb published an official hands-on video demonstration hosted by Nathaniel, who puts the pedal through an unusually massive test rig. Pointing out that the Roto Trem shares the exact foot-wheel enclosure of the Roto-Echo, Nathaniel runs the pedal straight into an enormous Benson Babylon—a towering tube amplifier rated at a staggering 880 watts RMS.

During the walkthrough, Nathaniel cranks the Speed Wheel all the way up to 10, showing how the hard square-wave circuit turns chords and single-note lines into aggressive, synth-like pulses that sound nothing like a conventional amp tremolo—and notes that its wild, unconventional character arrives in true Jack White fashion.
The demo also highlights the versatility of the dual-footswitch layout:
- Momentary Stutter Bursts: With the main effect bypassed, Nathaniel taps and holds the Momentary Footswitch to inject rapid rhythmic chops into sustained phrases.
- Momentary Dry Cutouts: With the tremolo latched on, he uses the same switch to temporarily mute the chop and let dry notes ring through before snapping back into the pulse.
- End-of-Chain Gating: Later in the session, Nathaniel moves the Roto Trem from the front of his pedalboard to the very end of the signal chain, demonstrating how placing the square-wave chopper after overdrive and modulation turns the entire rig into a tightly gated rhythmic instrument.
Limited-Edition Reverb Exclusive Yellow vs. Standard Black
All units from the launch are hosted in the official Third Man Hardware Reverb Shop, giving guitarists and collectors two ways to grab the pedal—though supply on both is tight:
- Black Mountain x Third Man Hardware Limited Roto Trem (Yellow): Draped in Third Man’s unmistakable yellow-and-black aesthetic, this edition is a Reverb-exclusive. Third Man Hardware has confirmed that once the Limited Version sells out, it is gone permanently and will never be produced again. Available via the Limited Roto Trem Reverb listing.
- Black Mountain x Third Man Hardware Roto Trem Standard (Black): Houses the identical square-wave chop circuitry, roller wheel, momentary switching, and dual rate LEDs in a classic stealth-black finish (retailing at $249 USD / regional equivalent), also available in limited production quantities via the Standard Roto Trem Reverb listing.
- +Foot-controlled speed wheel eliminates need to bend down during play
- +Hard square-wave chop creates aggressive, synth-like character unlike vintage tremolos
- +Dual momentary and latching footswitches enable stutter bursts and dry cutouts
- +Dual LEDs flash in sync with rate for visual timing feedback
- +Can be placed at end of signal chain to gate entire rig
- +Output trimmer allows unity gain or subtle boost
- −Limited production quantities for both finishes
- −Yellow edition confirmed as never-to-be-reissued once sold out
What type of tremolo does the Roto Trem produce?
The Roto Trem generates a hard square-wave chop tremolo that cuts the guitar signal cleanly on and off in percussive rhythmic patterns, unlike smooth vintage sine or triangle tremolos. It ranges from slow 1-second pulses at speed 0 to rapid 60-millisecond stutters at speed 10.
How do you control the tremolo speed on the Roto Trem?
An oversized top-mounted Speed Wheel lets you adjust the chop rate from 0 to 10 in real time using your foot, eliminating the need to bend down and twist a knob during performance.
What are the two footswitches on the Roto Trem?
The Effect On/Off Footswitch engages or bypasses tremolo permanently. The Momentary Footswitch temporarily reverses the bypass state only while held down—injecting stutter bursts when bypassed or cutting the chop for dry passages when engaged.
What power supply does the Roto Trem require?
The pedal runs on a standard 9V DC center-negative power supply drawing 0.1A (100mA) or higher through a 2.1 mm barrel connector.
Keep browsing
Get this stuff first.
Leaks, deals and reviews in your inbox, once a week. No spam, just gear.
