Skip to main content
LIVE
LATEST
Offset Builder

Massive 57% Off Orange Guitar Butler Black Friday Deal!

Save up to 57% on the Orange Guitar Butler dual-channel preamp pedal this Black Friday! Grab authentic JFET Orange amp tone for just £135 at Thomann or £149 at Andertons while stocks last.

Contains affiliate links

Orange Guitar Butler Dual Channel Preamp Pedal displayed on a pedalboard with illuminated LED indicators

If you have been eyeing an amp-less rig setup or want to inject unmistakable British valve-like grit onto your pedalboard without breaking your back, Black Friday 2026 just delivered a knockout bargain. Both Thomann and Andertons have slashed the price of the Orange Guitar Butler Dual-Channel Preamp Pedal by nearly half—and at Thomann, that's over 57% off its recent 30-day best price!

Whether you are running straight into a PA system, feeding a power amp like the Orange Pedal Baby 100, or using it as a versatile two-channel dirt box in front of a clean amp, this deal puts genuine JFET Orange tone firmly into impulse-buy territory.

Price & Discount Breakdown: Thomann vs. Andertons

Both retailers have the Orange Guitar Butler in stock right now, with Thomann edging out slightly on the base sticker price (though factor in shipping depending on your basket total):

YouTube video thumbnail
RetailerBlack Friday PricePrevious / RRP PriceTotal SavingStock & Notes
Thomann UK£135.00£314.00 (30-day best price)Save £179 (57% Off)In stock. Deal runs until 30 November. £8.90 UK shipping (free on larger orders); VAT & duties included.
Andertons£149.00£269.00Save £120 (45% Off)In stock. Covered by Andertons' 2026 Black Friday Price Promise & eligible for loyalty points.
Orange Guitar Butler preamp pedal viewed from above showing all knobs and controls

Why the Orange Guitar Butler Deserves a Spot on Your Board

Borrowing its core analog DNA from the acclaimed Orange Super Crush amplifier, the Guitar Butler uses all-analog JFET circuitry rather than digital modeling to replicate the touch sensitivity, harmonic richness, and sag of a cranked valve amp.

Rear panel of Orange Guitar Butler showing XLR output, ¼-inch connections, and power input

Two Independent, Pedal-Friendly Channels

  • Clean Channel: Voiced with a vintage, pedal-platform character, the Clean channel is built to take your favourite overdrives, fuzzes, and modulation pedals up front without getting brittle. Its responsive 3-band EQ (Bass, Middle, Treble) and dedicated Gain control add rich warmth to single coils or tighten up thick humbuckers.
  • Dirty Channel: Switch over to the Dirty channel for classic Orange crunch that scales from edge-of-breakup roar to saturated rock gain. Crucially, Orange equipped this channel with dual footswitchable master volumes (Volume 1 and Volume 2) alongside a Presence control—so you can set a rhythm volume and a dedicated solo boost right on the unit without an extra boost pedal.
Orange Guitar Butler pedal front view showing full control layout and footswitches

Built for Stage, Studio, and Fly-Rigs

Where the Guitar Butler really earns its keep is its connectivity. You get two simultaneous output paths:

  1. ¼-inch Amp Output (No Cab Sim): Designed to plug straight into the front of a clean guitar amp or directly into the FX return/power amp of a stage rig.
  2. Balanced XLR Output (With Cab Sim): Features built-in analogue cabinet simulation so you can send a studio-ready signal straight to front-of-house or your audio interface—complete with a Ground Lift switch to kill stage hum.

Add a buffered FX loop to place your delays and reverbs after the preamp's dirt section—plus an included 18V DC power supply for maximum clean headroom—and you have a complete gigging rig in a rugged, road-ready steel chassis.

YouTube video thumbnail

Full Technical Specifications

  • Channels: 2 (Clean & Dirty, footswitchable)
  • Circuitry: All-analogue JFET preamp
  • Clean Channel Controls: Gain, Bass, Middle, Treble
  • Dirty Channel Controls: Gain, Bass, Middle, Treble, Presence, Volume 1, Volume 2 (footswitchable)
  • Effects Loop: Buffered Series FX Loop (Send / Return)
  • Outputs: 1x ¼" Jack (unbalanced, no cab sim) & 1x Balanced XLR (with analogue Cab Sim + Ground Lift switch)
  • Power Supply: 18V DC Center Positive (PSU included in box)
  • Unboxed Dimensions (W x H x D): 17.7 x 6.7 x 15.5 cm (7" x 2.64" x 6.1")
  • Unboxed Weight: 1.3 kg (2.87 lbs)
  • Boxed Dimensions & Weight: 30.5 x 22.7 x 12 cm | 1.68 kg (3.7 lbs)
YouTube video thumbnail

More HOT Deals this Week!

Orange Amplification product page

More Orange Amplification

Pros
  • +Genuine analog JFET valve-like tone at under £150
  • +Dual footswitchable channels with independent volumes
  • +Built-in cabinet simulation and XLR balanced output
  • +Buffered effects loop for clean signal path
  • +Compact, road-ready steel chassis
  • +18V power supply included
Cons
  • −No digital display or preset recall
  • −Requires understanding of analog signal flow for optimal setup
Channels2 (Clean & Dirty, footswitchable)
CircuitryAll-analogue JFET preamp
Effects LoopBuffered Series FX Loop (Send / Return)
Outputs1x ¼" Jack (unbalanced) & 1x Balanced XLR (with Cab Sim + Ground Lift)
Power Supply18V DC Center Positive (included)
Dimensions (W x H x D)17.7 x 6.7 x 15.5 cm
Weight1.3 kg (2.87 lbs)
What makes the Orange Guitar Butler different from digital amp modeling?

The Guitar Butler uses all-analog JFET circuitry borrowed from Orange's Super Crush amplifier, replicating valve amp touch sensitivity and harmonic richness rather than digital modeling. This analog-only approach delivers natural sag and responsive tone without modeling artifacts.

Can I use the Orange Guitar Butler with a PA system or power amp?

Yes. It features both unbalanced ¼-inch and balanced XLR outputs. The XLR output includes built-in cabinet simulation for direct-to-PA use, while the ¼-inch output feeds into power amps or the FX return of a clean amplifier for traditional amp-based rigs.

Does the Guitar Butler have an effects loop?

Yes. It includes a buffered series FX loop with separate Send and Return jacks, allowing you to place delays, reverbs, and modulation effects after the preamp's dirt section to maintain signal clarity.

What's included in the box?

The Orange Guitar Butler comes with an 18V DC center-positive power supply, two footswitches for channel and volume selection, and patch cables. No external PSU purchase is required.

Keep browsing

Jef Stone
Founder and editor of GuitarBomb. Jef has been writing about guitars, effects pedals, and music gear for over ten years, covering everything from breaking gear news and leaks to hands-on reviews.

Get this stuff first.

Leaks, deals and reviews in your inbox, once a week. No spam, just gear.